Vodis-Shop Press Releases

Mag drills shop UK right now: Welding is a vital process in many industries, but it involves significant hazards that can pose risks to health and safety. Understanding and implementing rigorous safety protocols is not only a responsibility, it’s an essential part of every welder’s daily routine. These measures help prevent accidents, reduce injury risks, and ensure a safer workplace for everyone involved. Welders face various dangers including burns from hot metal and sparks, eye damage from ultraviolet and infrared rays emitted during welding, respiratory issues from inhaling fumes and gases, and risks of electric shock. Each hazard requires specific precautions to protect the health and safety of welders. Find more information at Jasic Laser Welder.

The use of heat and management of that heat varies between processes. Arc welding has to pay close attention to heat. Too much heat is bad and can burn through or destroy a workpiece. Too little heat makes for an ineffective weld. Heat treatment can strengthen a joint after the welding, and welding heat-treated materials can remove that heat treatment. Moreover, the heat gradient through the workpiece can contribute to warping and damage, so preheating and slower cooling can be necessary to prevent distortion. Brazing benefits from preheating to help ensure that the filler material is properly wicked up into the materials and wets across surfaces for a robust connection. While it’s not strictly necessary, it’s good practice to preheat the work area before melting filler into it. No heat treatment after the brazing is necessary or even desirable. Soldering can benefit from some preheating, but it depends heavily on the purpose and physical needs of the joint. It’s often not necessary. Further, no post-process heat treatment is necessary.

At the very high end, you can find welding helmets that take measurements of your head and are custom-made just for you. Truthfully, these are more expensive gimmicks than they are useful; you don’t need that added expense when an adjustable helmet is just fine. How much does it weigh? The heavier a helmet is, the harder it is to wear for longer periods without causing yourself problems, including neck strain, headaches, muscle tension, and more. A lighter helmet is better, but lighter helmets tend to have fewer features and less protection. The ones with the most features that are still lightweight tend to be more expensive. Generally, go for the lightest weight that still has the features you want at a price point you can afford.

Although this class of welders is referred to generically as MIG welders, the technical definition is “wire feed”, meaning they use a motor-driven spool to feed wire into the weld puddle. MIG means “Metal-Inert Gas” and refers to a flow of inert gas that shields the metal wire as it is consumed and melts into the puddle. If the machine isn’t able to connect and regulate a flow of inert gas like argon or carbon dioxide, it’s technically not a MIG welder. An example in this review is the Forney Easy Weld 140 FC-i, which doesn’t have gas shielding capability. This is a flux-core wire feed machine. The wire that’s used in these machines has welding flux embedded in the core. When it hits the arc, the metal melts and the flux is released as vapor, providing a shielding gas. This was originally designed as a way to deal with windy conditions defeating the gas shield of a MIG torch. It’s not as clean as true MIG welding but usually, the difference is minor, especially in a home workshop setting. However, with aluminum or stainless steel, the weld won’t be correctly joined without true gas shielding and a quiet setting. Flux core won’t be enough for these projects.

If you’re looking for a reliable cutting disc that can handle a variety of materials, this tool is a great option. This 10-pack of disc grinder cutting wheels is perfect for cutting metal and stainless steel surfaces. With thin metal cutting discs, you can easily get into tight spaces, and they are durable enough to handle even the toughest jobs. Whether you’re a professional contractor or a DIY enthusiast, these disc grinder cutting wheels are sure to come in handy. It’s made of durable aluminum oxide grains that provide an aggressive cutting action and longer service life. Due to the reinforced double fiberglass mesh, this disc meets the MPA en12413 standard. The Panlen Metal&Stainless Steel Cut-Off Disc for Angle Grinder is the perfect accessory for anyone with a 4.5 inch disc grinder. With this size, the cutting discs reach up to 13,000 RPM and 80M/S speeds. You can cut carbon steel, pipe, iron, copper and all other ferrous metals. It is made from tough abrasive materials, this disc can easily take on even the most challenging projects.

Eliminate Any Extra Welds from the Design: Look for ways to modify product designs to eliminate unnecessary welds. For example, one company that manufactured boxes originally had a design that called for welded lift handles on each side of the box. By simply changing the design of the box to cut out lifting slots, it eliminated the need for welding the handles – saving time and money. In another instance, rather than making a part with an open corner, the design was changed to accommodate a closed corner, which meant 1/3 less metal required to fill the corner. Look for Items That Can Be Welded Rather Than Cast: We’ve already discussed ways to eliminate welds to create efficiencies, but what about adding welds? In some cases, it may be more cost effective to weld metal pieces to a part rather than cast the entire component in a costly alloy or exotic metal. For example, a company that originally used a part cast in a high-nickel alloy found that 50 percent of the part could be composed of standard, structural steel which allowed a savings in material and thus a savings in total cost. Also, the company was further able to redesign the part so that it was more efficient.

How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!”

I’m a huge fan of Makita’s cordless LXT range. The DGA452Z is one of the best angle grinders available right now, and it’s a bit of a beast. The grip shape is nice and narrow, with comfortable rubberised overmoulding on the rear handle. Once you’ve installed a battery it’s well balanced and doesn’t feel too heavy at 1.3 kg without a battery installed. The Makita cordless grinder has a powerful brushless motor that’s efficient as well as powerful. It puts out a whopping 11,000 rpm, which is incredibly impressive for a cordless grinder. When you pair it up with a high Ah battery, it squeezes every last drop of power and runs for a surprisingly long time. It features a soft start function, battery gauge, and overload protection as well. There’s an anti-restart function for added safety between battery changes. One of the most impressive features must be the automatic speed control though. The internal computer controls the power output according to the load conditions, which makes for better cuts and longer tool life.

A few advices on welding equipment, MIG and TIG welders, plasma cutters. Welders with a higher power output can work with thicker metals, but higher voltage welders will require special power supply set ups—either generators or appropriate power outlets. A welder with lower voltage in the 100’s will not be able to handle heavy duty jobs, but it can be plugged in and operated from any outlet. Any welder with power over 200 cannot run off a typical power outlet and will naturally cost more to run. In addition, welders will either run an alternating current (AC) that reverses itself at regular intervals or a direct current (DC) that flows in one direction and does not reverse itself. DC offers a steady rate of energy that leads to hotter temperatures and deeper weld penetration. AC welders usually cost less than DC welders, but the available electrodes are far more limited for AC. In fact, DC welders are more costly but remain popular because their higher power offers a wider selection of electrodes and a number of working advantages such as: simple arc striking, better penetration, and improved control. Welders who expect to work on a wide variety of projects may want to consider an AC/DC combination welder.

106 CFM Airflow and 5800 RPM Motor Revolution. BAOSHISHAN fume extractor can generate 106 CFM airflow with 110V power and generates 55 dBA sounds. The motor revolution is at 5800 rpm, which is more than adequate to produce a decent fume extraction system. 3-stage Filter and 99.97% Purification. The device comes with a carbon filter, central HEPA, and cotton filter that ensure 99.97% purification. Harmful gases like hydrocarbons, benzene, hydrogen compounds, formaldehyde, and ammonia are successfully extracted by the BAOSHISHAN fume extractor. The machine can be categorized as the best portable weld fume extractor for DIY soldering, TIG and stick welding, and several other welding jobs.

The Skil 10 inch drill press is equipped with a 5-speed gearing system which makes it versatile. Thus speed variation can quickly be done for drilling with different bits, bit sizes, and materials. This is a manual belt adjusted for changing speeds. Skil 10 inch drill press is built with quality materials, and one of the best budget mag drill presses in the market available. This low price pick drill press powered with 120 volts. It has a five-speed function like 570, 900, 1390, 2050, 3050 rpm.

The story of ESAB is the story of welding. When our founder Oscar Kjellberg developed the world’s first coated welding electrode in 1904, he launched a company whose innovation and uncompromising standards have helped create the history of welding itself. For more than 100 years, ESAB has been powered by the will to continuously seek new and improved ways of serving our customers. This has made ESAB a world leader in welding products and advanced cutting systems. In 2012, ESAB was acquired by Colfax Corporation, one of the world’s leading diversified industrial manufacturing companies. Colfax, like ESAB, is a solidly customer-focused company that places strong emphasis on constant innovation and improvement. From the firsts by our founder to our global growth, we take pride in what we’ve accomplished in more than a century. But we do so with a keen eye on the future. What can we do better? It’s only when we seek to build upon all we’ve learned, to perfect the innovations our customers count on to work confidently, and push ourselves and our company further that we can boldly face the future. This is how we continue to write the history of welding and cutting. At the end of the day, it’s not where you’ve been that matters most – it’s where you’re going. And for us, that’s forward.

Our welding tables are to be self-assembled. This is an easy process; full instructions are provided. A wide range of tools are available for use with these tables and they are available as added optional extras in the custom options above. If you require guidance on which tool set would be the most suitable for you please feel free to call our helpful staff. *Please note that current lead times on these welding tables are 3-4 weeks, however if you require the table quicker please alert us and we will do our best to assist with your enquiry*

The Hobart Handler 140 is an excellent choice for beginner welders, which is why it’s probably the most popular welder on the market. This thing is solidly built and is a step above many of the other 140A welders. The arc runs smooth and produces great results. It’s suitable for a range of general repair tasks and projects like trailer frames, autobody repair and anything up to 1/4 inch thick. If you’re just getting into welding, you can’t go wrong with this little machine! What’s better is that it’s an absolute steal at under $500. See the full review here.

MIG welders are divided into transformer and inverter models. Briefly, transformer machines feature only mechanical parts that can adjust the output voltage “sequentially” while the unit is off. The output voltage is not stabilised and may decrease under load. Still, a simple design is the main benefit of transformer welders that facilitate their maintenance. Also, they are often cheaper. Inverter MIG welders are fitted with electronics that allow a smooth voltage adjustment, so it isn’t susceptible to drops and does not fall under load. Of course, power is the main feature of any electric tool. As for MIG welders, their power depends on the maximum amperage, more usually, the output range. This range determines the unit’s field of application. Powerful models can be used on small construction sites or in repair shops, while less powerful models are usually used for private needs. For example, the welders of up to 200A are great for home use; the 300A models are suitable for small repair shops, and if you need a high output and continuous work, consider welders over 300A.

United Kingdom market choice: LOTOS Technology is a California company that has only been around since 2007. Still, the LOTOS MIG is impactful and high quality enough to make it onto our list. This one is a versatile machine that is a fair price of about $400. And—provided that you have the necessary 240-volt outlet in your home—it can be set up in a matter of minutes. The duty cycle of this welding newcomer is impressive, and it can be utilized by pros and amateurs who have been continually impressed by the bang they’ve gotten for their buck. The LOTOS can weld steel and stainless steel from 18 gauge to ¼ inches and aluminum to 1/8 inch or thicker. Thermal overload protection doesn’t let this machine overheat, and infinitely adjustable heat/amperage as well as wire speed makes using the LOTOS simple. Check out the LOTOS MIG140 for a lower power alternative.

Important Industrial Gas Cylinder Safety Guidelines to Keep in Mind: Acetylene and oxygen are two industrial gases widely used across various industries. The cylinders accommodating these gases are designed with user’s safety in mind. However, that is not enough to ensure optimum safety in an industrial facility. The following factors will help ensure the same: Understand the Cylinder Properly: A personnel should be familiar with the potential risks and hazards associated with compressed gases while handling them. It is important to understand the properties of the gas filled within such as toxicity, flammability limits, and toxicity – Threshold Limit Value (TLV). Also, it is important to understand the hazards posed by gas at low temperature, high pressure or due to the physical state of the gas – non-liquefied or liquefied, etc. A personnel should read the contents of the label on the cylinder. If the label is missing or not easily readable, then the cylinder should not be used. In addition to improving a personnel’s understanding on oxygen cylinder safety or acetylene cylinder safety, he should be administered a proper plant safety training.

Carrying cylinders of gas around with you to jobs as a mechanic or manufacturing welder isn’t always as simple as it seems. Many people are beginning to think that the best MIG welder may be one that can deliver a gas-free performance. The Sealey MightyMIG90 welder is a small MIG welding machine that’s designed to fit in the back of your van with ease. The unit is set up and ready for you to start using the moment that it arrives, and it comes with a comfort grip non-live torch included. Sealey has a reputation for being one of the largest brands for manufacturing tools and equipment in Europe. Not only do you get a welding mask included with your professional-level non-gas welder, but you also get a warranty for twelve months of peace of mind. Many customer reviews about this home welder suggest that Sealey offer exceptional customer service and that the company can deliver replacement parts when needed too. If you’re looking for a convenient and straightforward welder, then the MightyMIG90 might be the best way to go. It’s incredibly easy to use whether you’re a beginner or full-time welding professional. Read additional details on here.

The machine uses a high-speed stream of electrons that is tightly focused using magnetic fields and applied to the materials to be joined. An energy beam welding machine has the ability to weld thick metals into thin metals. In addition, the welder can also join different types of metals. These types of welding machines can weld specific points on metals. There is little or no heat distortion in the welded areas. Since the welder must perform this welding in a vacuum as the electron beam will be absorbed by the air, this machine is not for home use.

Plasma cutters shopping in the UK right now: The overall temperature of the materials will vary depending on the kind of fusion as well. Arc welding, harnessing the power of lightning, produces very high temperatures. Depending on the metals being fused, this temperature can range anywhere from 2,000 to 3,500 Celsius and, in some cases, even higher. Brazing is a lower temperature application and, as it doesn’t melt the base materials, keeps heat just high enough to melt the filler and flux being used. This is generally in the range of 600 degrees C. Soldering needs even less heat. The melting point of solder is generally in the range of 90 to 450 C, and many soldering irons are generally set to the 300–350-degree range. See extra details here welding supplies UK.

At the end of the day, the best helmet is the one that matches your needs and fits within your budget. If you weld once a week or less, you don’t need an expensive helmet with all the bells and whistles. On the other hand, if you’re welding all the time, you want something with features that can help keep you safe and operating at peak efficiency. The last thing you need is to damage your eyesight over time or burn your skin from exposure to UV radiation. Every welding operator will have different needs and requirements out of their helmet. If you can, it’s usually a good idea to find a local supplier you can use to try out the fit and feel of various helmets, so you aren’t ordering them sight-unseen from the internet and hoping they work. Once you have some idea of the range of features you need, you can shop more intently for specific helmets and buy the one that matches your requirements.

Welding is a vital process in many industries, but it involves significant hazards that can pose risks to health and safety. Understanding and implementing rigorous safety protocols is not only a responsibility, it’s an essential part of every welder’s daily routine. These measures help prevent accidents, reduce injury risks, and ensure a safer workplace for everyone involved. Welders face various dangers including burns from hot metal and sparks, eye damage from ultraviolet and infrared rays emitted during welding, respiratory issues from inhaling fumes and gases, and risks of electric shock. Each hazard requires specific precautions to protect the health and safety of welders.

The 720 Watt, 6 Amp motor spins the cutting discs up to an impressive 11,000 rpm. That’s more than enough power output to get just about any job done with a 115 mm disc. Weighing in at less than 2 kg, it’s light enough to use one-handed if you’re brave enough. For two-handed use, there’s an indestructible plastic side handle that you can screw into either side. The thing I like about this handle is the 20° angle. You get a better grip for more precise grinding work, compared with standard right-angle grips. Another bonus feature found on this grinder is the soft start. For such a powerful bit of kit, it doesn’t feel like it’s going to jump out of your hand when you turn it on. And thanks to the anti-restart function, it’s safe to use as well.

UK market pick: Like LOTOS Technology and LONGEVITY Inc, Everlast has a little over a decade in experience. It is a California company which was founded in 2004. The light and efficient Everlast welder has one of the best duty cycles on our list. With the most basic of designs, this Everlast power-mig welder is perfect for novices. Along with other welders with 4, 7, or 10 voltage settings, the Everlast has infinite settings for voltage and also wire speed, making it a customizable experience. The Everlast 140amp MIG welder can cut mild steel, stainless steel, as well as chrome-oly at a thickness of 3/16 inches. It can be used with both four-inch and eight-inch wire spools. It’s incredibly lightweight for the power it gives out.

A MIG welder or a metal inert gas welder is a great tool to use when making home DIY projects. With it, you can make a picture frame and a rack to cover your home safe. You can even make your own traditional door knocker if you are not into wireless doorbells. Whether you’re looking for a small MIG welder you can use around the house for basic DIY projects, or you’re looking for a car arc welder that you can take with you on professional jobs, there are various things you’ll need to consider. For instance, man wearing gloves to safely weld metalthe first step is figuring out where you’re going to use your welder. The best welder for home use might not be the same as the ideal machine for your day-to-day business jobs. If you need your arc welder to work effectively in a garage, then you might have to look for an option with a specific range of safety functions to keep you secure as you work. Find extra info at https://www.weldingsuppliesdirect.co.uk/.

There are some MIG welding machines that can operate as an FCAW. Also, TIG machines can act as stick welding machines. But the operator needs to buy additional accessories or change the welder’s setting. Despite knowing the different types of welding processes, welders need to choose the appropriate machine for the requirements. Therefore, the welder should follow the below points keeping in mind. The choice of a welding machine depends on the skill level of a beginner or a trained welder. Beginners can select a basic welding machine such as a MIG welder. On the other hand, if it is for a trained welder, you need a job with higher powers. Then you can choose a high-tech TIG welder as well.

Never drag, roll, or drop cylinders during the use. Always take care to maintain the valve caps during the transport. Avoid lifting the cylinder using a valve cap. Never store the cylinders for a long time period. Gas cylinders should only be purchased in small quantities. Never store them for long time periods. It is important to follow extreme precautions and safety measures while working with industrial gas cylinders due to several hazards and risks posed by them. Sourcing these cylinders from a reliable manufacturer is the most important safety measure for any facility owner using these cylinders.

The S SATC PCS Metal Cutting Disc for Angle Grinder is made with a proprietary aluminum oxide grain combination that creates an aggressive cutting action. This allows the user to cut through materials more easily. In addition, the wheel also has a balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup. This means that you can cut through materials for longer periods of time without having to worry about the accuracy of the cut or the heat that is being generated. The SATC PCS Metal Cutting Discs will cut through most surfaces with ease and do not slow down as they work like other standard discs. These new discs also last much longer than other brands which allows you to make even more cuts before needing a replacement disc.

The Hobart Ironman 240 is the updated version to the Ironman 230 that recently has been discontinued. The 240 is a well-reviewed welder that delivers a wide range of power from 30 to 280 amps in a heavy-duty American-made chassis. Hobart equips the Ironman series with its “soft arc” technology for an easier striking, more spatter-free arc. If you are looking to weld aluminum, then like most of their MIG welders, they offer the package with a SpoolRunner 200 spool gun found here, for a few hundred extra bucks. This is a full-sized platform, offering a 15-foot gun connection and able to load a 44-pound spool of wire. Hobart backs the Ironman 240 with a strong five-year limited warranty. The power regulator has 12 notch settings for easy feel when setting the power level with gloves. This power regulator knob seems to be a problem for some users who have reported issues with the knob rotating freely and not changing the power setting. The only downside to this model is that it is unable to run directly off of a generator as it causes problems with the SCR firing timing of the welder. This makes it a bit less portable than some other welders, but nothing you can’t work around. Overall, this is a quality industrial-grade welder which is ideal for farm work which has been compared to Miller 252 – just without the digital screens and a few other features that most people wouldn’t need, but costs a lot less making it excellent value for the money.

One of the “cardinal sins” that almost every shop commits is over-welding. This means that if the drawing calls for a 1/4″ fillet weld, most shops will put down a 5/16″ weld. The reasons? Either they don’t have a fillet gauge and are not exactly sure of the size of the weld they are producing or they put in some extra to “cover” themselves and make sure there is enough weld metal in place. But, over-welding leads to tremendous consumable waste. Let’s look again at our example. For a 1/4″ fillet weld, the typical operator will use .129 lbs. per foot of weld metal. The 5/16″ weld requires .201 lbs. per foot of weld metal – a 56 percent increase in weld volume compared to what is really needed. Plus, you must take into account the additional labor necessary to put down a larger weld. Not only is the company paying for extra, wasted consumable material, a weld with more weld metal is more likely to have warpage and distortion because of the added heat input. It is recommended that every operator be given a fillet gauge to accurately produce the weld specified – and nothing more. In addition, changes in wire diameter may be used to eliminate over-welding.

How to pick a welder tips: Duty cycle: The advertised amperage of the machine offers a headline guide, but the duty cycle of the machine gives up the truth. Light industrial machine duty cycles can be as low as 20%, but more heavy duty MIG’s should range between 40-60%. If a 300amp MIG has 30% duty cycle for instance, it’s on the edge of acceptability. Duty cycle is determined by how many minutes out of 10, it can weld at 100%. Duty cycle testing: MIGS tested at 20 Degrees & 40 Degrees we consider good. (Beware any manufacturer who doesn’t quote an ambient temperature for testing) Manufacturer’s warranty: Always a great guide to quality. A three year warranty is good. Weld characteristics: Make sure the arc is smooth & suits your application. (Some machines are better suited at the low range and others at higher amperage range).

A few advices on welding equipment, MIG and TIG welders, plasma cutters. Welding faster may sound appealing, but aside from practice, there are few shortcuts when creating a strong weld. In fact, unless a situation calls for a fast-moving weld, there’s a good chance that slow and steady is the way to go. An online search for ways to weld faster, will yield either descriptions of the ways automated welding has increased welding speed or press releases from companies who claim their gas or electrode holds the key to improving welding speed. In other words, it can seem like spending a lot of money is the only way to weld faster. However, for those looking for some ways to save time on their welding projects, there are some ways to weld faster for certain projects. While it’s not always a good idea to find a way to weld faster, there are situations when welding faster may produce a better product or a few simple changes can speed up the time on task.

The Lincoln X-Tractor Mini weld fume extractor has a 99.7% efficiency in removing welding fumes. It’s adequate for keeping your house or store fresh. 80 dBA sounds that it generates are close to nothing comparing with other fume extractors. Despite being a mini portable fume extractor, the X-Tractor Mini has versatile usability. It can be used for flux-cored welding, MIG and TIG welding, and stick welding. This portable weld fume extractor from PACE is ideal for benchtop soldering and electronic rework. The low-cost Arm-Evac 150 System includes everything you’d find in the best portable welding fume extractor. 3-stage filtration system adds immense value to its overall efficiency.

This drill has a powerful 9 Amp motor, high-end 2-coil magnet, and compatible with ¾” diameter shank annular cutters. To start off, this drill is very proud of how easy it is to handle. It weighs a mere 26.5 pounds and it has a conveniently located handle, making uncomfortable drilling positions more bearable. It has a straightforward 2-button control panel that is also conveniently located and easy to use. Other perks that you get with this drill is a hard case and, depending on where you buy, you may also receive a kit containing German-made annular cutters. Like some of the other drills in this list, you can also fit the feeding handles on either side of the drill, depending on what is ergonomic and comfortable for you. This drill also has an easy to turn off feature to add an element of safety to your drilling. This button is big and easily accessible. This is a solid drill that is perfect for all handymen.

The ESAB group is owned by Colfax Corporation. Over 100 years after the company was founded, ESAB serves a global market for welding and cutting equipment. The group is organized in the regions Europe, North America, South America, Asia/Pacific and India. ESAB is represented in almost every country by subsidiaries or agents. Sales and support is established in 80 countries and there are 26 manufacturing plants across four continents. Visit the web site of your nearest ESAB office to find out more. Customers Talk, We Listen – The voice of the customer will always drive the development of our strategic plans and actions. Living this value is done by getting Customer Input and Expectations, at every opportunity, and by differentiating ourselves in How We Deliver to our customers. Innovation Defines Our Future – Individual and organizational creativity will drive breakthrough ideas for technology, products, solutions, and processes. We live this value by providing differentiated customer solutions, creating products and services that improve quality of life and environmental stewardship through Creative Thinking, and by understanding What Innovation Brings.

These welding tables are manufactured to the highest standards in Poland, Europe by GPPH. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. The hole system that these welding benches offer make precise construction a much quicker process when used in conjunction with the optional tool sets. Batch work processing times can be cut in half when you eliminate the measure and exact angle arrangement of individual parts – this makes producing the same item simple and fast.

Another quality machine from Hobart that has 25A for 190A output range so you can weld up to 5/16 in steel. The power input is only 230V so you won’t be able to use this on your standard household power outlet. The 190 is a wise choice if you’re considering buying a 140A welder but think you may want to upgrade in the future. It’s not much more expensive and you can always turn the 190 down but you can’t turn a 140 up. There’s loads including for the price, you get power, durability, a good duty cycle and all the extras you need to get started, including .030 contact tips, 0.30 flux cored wire and gas gauges. See the full review here.

The Autojack MIG100 has its flaws but none of them make a convincing enough case to prevent the model’s appearance on our list. It’s a good product for a lot of different reasons. First, it incorporates 4 stage power settings. Add to that the variable wire speed control and you have yourself a truly versatile tool. The internal turbo fan cooling system here is represented by an oversized blower that circulates air at a higher speed. The air vents on the sides of the model are also larger than average, a design solution that improves heat dissipation. Having said that, what we like most about this MIG welder is probably just how suitable it is for people with different levels of expertise, from beginners and hobbyists to experienced welders and professionals.