Day: February 22, 2023

Categories
Auto and Vehicles

Professional mobile vehicle tyre mechanic Reading, UK 2023

At home car tyre repairs Reading, UK near me? Do You Need Winter Tires? Drivers who regularly drive in snowy, icy, or cold-weather road conditions should consider purchasing winter tires. As the name suggests, winter tires are not only for snow. Often, the material of non-winter tires cannot withstand colder temperatures. Drivers who opt to keep their all-season tires on during the winter months may run into what’s called glass temperature transition. Rubber typically begins to behave differently at temperatures around and below 45 degrees Fahrenheit. Rather than its usual soft, flexible structure, cold rubber begins to harden and crack, much like glass. This state can severely impact a tire’s traction and overall performance. So, if you live in an area that regularly experiences temperatures below 45 degrees, winter tires are likely a good investment. Searching a premium tyres Reading?

Are the mechanics fully licensed? For you to have a valid mot inspection, you need to take your vehicle to a fully licensed mechanic. You can ask the mechanics about his qualification or just ask other people who have been served. It is always necessary for you to go for a car repair centre which has been licensed to offer the Mot inspection. Remember failure to take your car to a fully licensed Mot inspection center can make the inspection invalid which will expose you to different legal issues. You should insist on hiring fully licensed professionals at all times.

Rough idle? A good dousing with throttle body cleaner may be enough to restore your EGR valve to near-mint condition, transforming a harsh idle into a soothing hum. Clean an EGR valve with these instructions for one of those easier car repairs.Replace a leaky gasket cover on a 4-cylinder engine easily and in less than an hour for less than $25. We show you how to fix a leaky gasket here. Fixing a clunk when your car hits a bump is a trial and error process. Start with the stabilizer bushings and then the bar end links, using a special tool. Replacing sway bar links is way cheaper than you think, see how to replace sway bar links and how much it costs. The most important thing that everyone must remember is safety. If your vehicle isn’t functioning properly, it might be a contributing factor for possible accidents. So, you have to prevent it by hiring mechanics to offer you the right repair service.

We offer a Collect your Car Service for customers that need work done to their car but cannot get to us due to Work Commitments or any other reason, This is also Applies To our Elderly Customers. We can Also Offer A Courtesy Car On Request if it is available at the time you require it. Car Repairs Reading From The Car Service Centre Reading,We Have over 35 Years Experience In The Motor Trade and Plenty of experience at diagnosing Your Car Problems Fast, with a Quick Turnaround to get you back on the road in Double Quick Time. A Car Recovery Breakdown Service Is Also Available On Request.

An MOT certificate confirms at the time of the test your car met the minimum road safety and environmental standards required by law. It doesn’t mean your car will remain roadworthy for the following 12 months. You still need to make sure you maintain your car well, including regular servicing. Make sure you’re not caught out by any of the five simple reasons for a fail shown above, then inspect your car against our 11-point checklist below. If you find any problems in the following areas, you can fix some yourself to help keep garage costs down.

Car BodyWork Repairs Reading is a focused team with highly skilled and well trained professionals who have a lot of experience on bodywork. We have staffs who are highly motivated with years of experience and good skills on vehicles’ glass removal, refinishing, refitting, and dismantling of most valuable vehicles for repair and large scale hand panel beating and metal shaping. As a resident of Reading or Berkshire, you really need not look further than The BMW service centre. We have the best BMW specialists in the area and our assurance to all our customers is that they can entrust their prized BMWs with us. There are many vehicle service centres in the Reading and Berkshire area and yes they do provide a wide range of vehicle related services. However, one thing that you need to know is that a BMW should never be left to regular mechanics. You will be happy to know that our mechanics are not your everyday average technicians; we have the expertise to sort out any issues that your BMW might be having and get you safely back on the road in double quick Time

Check your windshield wipers to see if there are any fraying, cracks, hanging rubber, or bends. If so, it’s time to change your windshield wipers. Another more obvious way to determine if your wipers are still effective is to wet your window and turn them on. You can squirt your windshield washer fluid or just pour some water on the windshield. The water should wipe away easily without blotting or streaks. If streaking, use a rag and wipe away any dirt and oil from your blades and window then retry. If not wiping evenly and cleanly, have your wipers replaced.

The car service checklist is an important guide to understand what is needed and how it can help you save money and keep your car in the best condition possible. Don’t be tempted to drive without an MOT If your vehicle has failed its MOT – or you haven’t booked one in – then address this as soon as possible. Driving without an MOT can lead to serious penalties. If caught, you can be fined £1,000 for driving a car without a valid MOT certificate. If you choose to drive a vehicle deemed ‘dangerous’ by an MOT test, you can be fined up to £2,500, be banned from driving, and receive 3 penalty points.

The brake system of your car is one of the most important, which is why you need to pay attention to the brake pads. Most owner’s manuals recommend you change the pads every 20,000 miles. However, if you drive your car every day, and have to brake more often, you might have to replace them more often. People who live in the city and have to deal with a lot of traffic and stop more often should consider changing the pads more often. Replacing the brake pads is a fast and relatively inexpensive process.

The Car Recovery service offers a 24 Hour Vehicle Recovery service in Reading, also covering the whole of Berkshire, Oxfordshire, Buckinghamshire, M4, M25 And Into London so no matter when you break down, you know that you are going to be in safe hands.with us. Once you phone us we can normally be with you within one hour of you contacting us sometimes this can be quicker it just depends on what is happening at the time of you contacting us but you can be assured that we will always get to you as quick as we possibly can. Our Office number is 01189581198 and our 24 Hour Emergency Number 07968456456 / 07435974844. We Are A Competitive Car Recovery Company With Competitive Rates With secure overnight storage facility’s available for you to use if required at all times. Discover more information at https://www.mobiletyres-reading.co.uk/.

You can find professional mobile Tyre fitting service providers online that make it easy for you to place the order online, and they deliver their services at your location. You don’t have to go to the Tyre fitting Garage service, and you don’t have to take a break from your work we will come to you with a fast efficient service with a smile. You might find your vehicle has a puncture, meaning disaster if you haven’t got a spare plus a lengthy replacement process. Alternatively, you might get home one day and notice damage on the Tyre’s, making it risky to go back out on the road to get them replaced. That’s why mobile Tyre fitting has become an increasingly popular choice among car owners. Instead of having to make a sometimes risky drive to the garage or turn into a DIY mechanic on the roadside. When you call our Berkshire mobile mechanics company, a team of professional mechanics will reach the site of the car breakdown with all the equipment that they may require. If you own a car, you must have heard about the mobile mechanic services. These professionals can fix the vehicle problems at the breakdown site as there will be no need to visit the mechanic workshop. You have to hire a towing service in this case, Only some mechanics are giving repair services with towing services As well but we do offer this service if necessary as some repairs are not repairable at your home or business.

Categories
Sports

Bill Trikos’s best 5 Bathurst Australia 1000 editions

Bill Trikos’s best 5 Bathurst Australia 1000 editions: Shane van Gisbergen and co-driver Jonathan Webb drove exceptionally for most of the race, though they also benefited from others misfortunes. Random mechanical failures ended James Courtney and Greg Murphy’s race (which eventually was Murphy’s last Bathurst fling), and it was the same for David Reynolds and Dean Canto. Then there was Scott McLaughlin, who put his Volvo in the wall at the Cutting — scenes of him wiping tears inside his visor beamed around the world.

The Great Race reached another turning point in 2013, with the introduction of New Generation V8 Supercar regulations. Makes other than Ford and Holden came back to the race, although Ford’s Falcon set a new track record to narrowly pip a trail of five Commodores to the post. The highest-placed ‘other’ make was a Mercedes-Benz E63 AMG. It came in 54.2 seconds behind first place. The ‘Supercars Championship’ era was inaugurated in 2016 and taken by a Commodore for three years in a row. However, 2019 became the first year that no Australian-built car raced the Bathurst 1000. The Falcon was discontinued in 2016 and replaced with the Mustang, while production of the Holden Commodore now happens in Germany.

The 1992 edition didn’t start in wet conditions, but it sure ended in them! Steady rain set in during the early stages, triggering a series of incidents and accidents – eventual winner Mark Skaife even hit the Pace Car during a Safety Car period called when the weather was at its worst. The weather lifted for a few hours before returning with a vengeance on Lap 144, causing a series of crashes that prompted officials to red-flag the race and end it prematurely. See extra details about the author at Bill Trikos Australia.

It did this through an unforgettable fight between Canadian Allan Moffat and home-grown hero Peter Brock. It was a lengthy game of cat and mouse that would also define the Brock and Moffat rivalry for many years; Moffat able to grow his leading margin on the straights in his big powerful Ford Falcon XY GTHO, while Brock would reel him in every lap through the nuanced corners over the top of the mountain. Eventually Moffat caved, spinning out at Reid Park and handing Brock a tense win, but it was more than that. Like the torrential downpour of 1992, it built towards the lore and mystique of the mountain, and helped forge our current concepts around Bathurst. Our desire for a combination of villains, underdogs, and rivalries that can’t be matched by any other race in the world. That’s why it’s here.

Bill Trikos

2013 came down to an epic showdown between two of the sport’s greats. Holden’s flagship driver Jamie Whincup took on Ford’s flagship driver Mark Winterbottom. Whincup made a daring move on the outside of Frosty that would cost him the win, but would also secure him a permanent spot in Bathurst’s greatest moments. And finally, Frosty got the win that had escaped him for so long. One of the scariest moments in Bathurst history came in 1969 when Bill Brown flipped and rolled along the guardrail, which cut into the cockpit of his car. Fans narrowly escaped the airborne machine and Brown somehow escaped with his life and limbs intact.

Nissan will celebrate 25 years since its first Bathurst 1000 victory at this year’s edition of “The Great Race” at Mount Panorama in Australia. The #23 NISMO Nissan Altima Supercar of Michael Caruso and Dean Fiore will race in the classic red, white and blue color scheme of the 1991 Bathurst 1000-winning Nissan GT-R R32 at the 2016 Bathurst 1000 on October 6 to 9, a quarter of a century after Mark Skaife and Jim Richards dominated the same race.

When the Great Race was first run on Phillip Island in November 1960, the cars were divided into five classes according to engine capacity. No ‘overall winner’ was to be declared. However, the first car to pass the winning line was a baby blue Vauxhall Cresta driven by John Roxburgh and Frank Coad, in the 2001cc-3500cc category. Roxburgh and Coad are (controversially) considered to be the first (unofficial) winners of the Great Race. But some claim the Russell/Anderson/Loxton team covered the ground quicker in their Peugeot 403, which joined the race 30 seconds later than the Cresta due to staggered starting times between classes.

In the end, somewhat ironically given the dominance of other teams, that all four Red Bull Racing and Pepsi Max Crew cars would battle for top honours. And we all know how that ended … Like 2007, the 1994 race benefited from the age old theory of adding water to race tracks to create a bit of drama and intrigue. Starting in some of the wettest conditions ever seen on the mountain, most of the field vanished into the spray coming up Mountain Straight and then again down Conrod.

Categories
Travel

Morning desert safari in Dubai and excellent travel tours today

Dubai desert camel safari and top travel packages 2023? Traveling is the charm of life & especially Dubai tour is an astonishing experience. Although Dubai Is famous for its incredible attractions in the World, the most enjoyable tour is of desert safari adventures like dune bashing, Hatta Oman safari, quad biking, camel riding, and extreme adventure sports in Dubai. Most people get attracted to morning desert safari Dubai and evening desert safari. However, keep in mind: your operator makes your tour outstanding or poor, so choose your operator carefully. Find even more information at desert safari Dubai deals. It’s for sure you’ve been planning your trip for a while so let us give you the reliable desert safari service where we provide prompt pick & drop offers to and from your preferred place (Home or Hotel) anywhere in Dubai, Sharjah and Ajman.

You don’t have to go too far away from the skyscrapers to soak up a more natural vista. The Ras Al Khor Wildlife Sanctuary incorporates the mangrove forests and wetlands of Dubai creek. An important stop-off on the migration routes, it’s a prime place to spot flamingos in winter when massive flocks of these majestic pink birds wade through the lagoons, backdropped by soaring high-rises. Various hides in prime spots have been set up within the park to allow bird-watchers good views of the bird life. This museum explores the United Arab Emirates’ historic role as a trading center between Asia, Africa, and Europe long before oil became this region’s most prominent industry. Located inside the old residence of Sheikh Hashr bin Maktoum Al Maktoum, who was a member of Dubai’s ruling family, the exhibits trace this coastal area’s history as part of the global trade routes, with displays of artifacts and manuscripts. Also on-site is the Rare Books and Manuscripts Museum and the small Armory Museum.

For those who like to shop, dine, see a movie and go to the beach all in one place, consider a trip to The Beach at Jumeirah Beach Residences (JBR). With guest DJs pumping out the tunes on weekends, a regular open-air cinema and a popular water park to entertain the little ones for an hour or two, JBR is always buzzing with activity. The Beach is also connected to the new Bluewaters Island district by a pedestrian bridge. This hip new destination is home to the Caesars Palace Bluewaters Dubai – the world’s second Caesars Palace – and the sunshine-soaked Cove Beach, as well as an array of restaurants and lounges.

The spice souq is a must-visit spot in UAE. The spice souk in Deira is located quite near to the gold souk. The souk has various narrow lanes filled with the aroma of spice, which will give your sense an ecstatic feeling. Apart from the spices, the retailers in the spice souk promote shisha and frankincense plus herbs used in traditional South Asian and Arabic meals, artifacts, rugs, incense, and textiles. Exploring spice souk will definitely give you an idea about the historical side of this post-modern city. Moreover, this will be a unique shopping experience for you. The narrow alleys of souq have the aroma of spices, where you can hop on take some back home. Dubai has always been an epicenter of tremendous growth and technological innovations. The city has become a tourist hub attracting millions of people worldwide only because of the iconic human-made structures. One of these human-made wonders in this desert is the 22,500 square meters indoor ski resort. It features an 85-meter high snow mountain that consists of 5 slopes with different levels of difficulty and steepness.

The time you visit Dubai is an essential factor that everyone harboring the ambition of enjoying the Dubai adventure must consider. The reason behind this factor is the weather of Dubai. As a desert, there are times when Dubai experiences extreme temperatures that can be dangerous to your skin. With such severe weather, it will be disastrous to visit as you might find yourself spending your time indoors to avoid the hot weather. The best time to visit Dubai is between November and March. Discover a lot more info on https://www.dubaidesertsafari.tours/.

Categories
News and Media

The true story of Progenex

Untold – The Inside Story by its Founder in a Three-Part Tell-All Expose

Adam Zuckerman, founder of Progenex – an international sports nutrition company, emerges from the shadows after 10-years to tell the true accounts of great invention, criminal fraud, and what he intends to do about.

In 2009, Adam Zuckerman, an American finance entrepreneur partnered with Dr. Scott Connelly, famed inventor of MET-Rx, an American brand of nutritional supplements Connelly sold to Rexall Sundown for $108 million in 2000, currently owned by NBTY.

After 9-years of retirement, Connelly wanted back in the game and launched Progenex Dairy Bioactives, Inc., a bio-nutritional/medical start-up, consisting of a patented and proprietary product Connelly named “Recovery.”

Recovery, as its name implies, was a consumable whey-protein hydrolysate Connelly co-developed with largest dairy producer in Australia, Murray Goulburn Co-Operative Co. Limited (MGC), acquired in 2017 by Saputo (TSX:SAP) for $1.2B. MGC and Connelly co-created a unique substance called Whey Growth Factor Extract (WGFE), which was discovered by tracking RNA expression signatures to reveal which genes were involved with muscle growth, metabolism, and inflammatory response. The product was noticeably effective and it was pricey because it was costly to make. As part of Connelly’s agreement to co-develop WGFE, MGC granted Connelly an exclusive license to market WGFE in the United States, provided he could meet minimum production thresholds for raw materials. Connelly needed a business partner and capital.

Prior to founding Progenex Dairy Bioactives, Inc. with Zuckerman, Dr. Connelly began his career as an anesthesiologist.

Dr. Connelly worked in the hospitals burn unit, which is where he discovered that healing from wasting or damage to human tissue was to occur from the inside out not topically. Simply, while the medical and pharmaceutical world raced to create a topical solution for tissue regeneration, Connelly created a digestible consumable that would not only prove to regenerate tissue in burn victims and slow wasting, but in anyone who needed fast repair and recovery. These findings led to the creation of Progenex “Recovery” – the company’s marquis product, but not before Connelly made his bones a decade earlier, where many sports-fitness enthusiasts consider Scott Connelly the Godfather of industry.

MET-Rx is best known for pioneering a new category of bodybuilding supplements known as meal replacement powders or MRPs.

It was also involved in the androstenedione controversy in the late 1990s. As noted above, the original MET-Rx product was intended to help prevent critically ill patients from losing muscle mass. Connelly’s product was marketed in cooperation with Bill Phillips and the two began marketing to the bodybuilding and athletic communities, launching sales from the low hundreds of thousands to over $100 million annually.

Connelly sold all interest in the company to Rexall Sundown for $108 million in 2000. MET-Rx is currently owned by NBTY

Connelly’s intended application for MET-Rx was the medical sector, as with Progenex to follow, where MET-Rx fast became the gold standard for the bodybuilding community worldwide for obvious reasons in the 80’s – lifting weights is a process of repeatedly tearing tissue and requiring fast repair. And Connelly wasn’t shy about being the poster boy for his brand, nor did he pose in a lab coat. Quite the contrary, where beyond his exhaustive credentials as a protein science pioneer and MD, who revolutionized an industry, Connelly was ripped and often posed with dumbbells in his hands and a tank top for advertisements and interviews.

Enter CrossFit. Progenex gains significant momentum as the title sponsor for CrossFit and becomes a national brand.

Greg Glassman, founder of CrossFit, met with Zuckerman and Connelly in 2011 to strike a deal with Progenex as title sponsor for the CrossFit Games. CrossFit was just becoming a household name, which attracted Reebok in 2014, squeezing Progenex out.

CrossFit, a branded fitness regimen that involves constantly varied functional movements performed at high intensity. The method was developed by Greg Glassman, who founded CrossFit with Lauren Jenai
in 2000, with CrossFit its registered trademark. The company forms what has been described as the biggest fitness chain in the world, with around 12,000 affiliated gyms in over 150 countries as of 2022,
under half of which are located in the United States.

CrossFit, meaning cross-discipline fitness, was conceived as a company in 1996 as Cross-Fit. Greg Glassman and Lauren Jenai incorporated CrossFit, Inc. in 2000. They opened a gym in Santa Cruz, California in 2001 and posted their workouts on the Internet for their clients, and these workouts were then quickly adopted by individuals in the police, military, firefighting services. The first affiliated gym (known as ‘box’) to form was CrossFit North in Seattle, Washington when Glassman’s internet postings were used by those who wanted to officially incorporate his workouts into their training regimen in 2002.

Glassman obtained complete control over the company in 2012 after a divorce with Jenai, who tried to sell her share in the company to an outside party after the divorce settlement, but Glassman bought it with a $16 million loan from Summit Partners. In June 27, 2020, CrossFit sold to Eric Roza, a tech entrepreneur who made his name and fortune with a data company he sold to Oracle for $1.2 billion in 2014. Roza, 53, according to one source, paid $200 million buying CrossFit Inc.

Connelly and Zuckerman go to war over Progenex before the ink even dries.

In May of 2010, Zuckerman brought suit against Connelly for breach of contract. Both said to have egos as large as the Grand Canyon, Zuckerman emerged victorious in 2013 after a three-year legal blood bath, winning all of Connelly’s shares for $1 dollar. But this is merely where the story begins. Progenex had become an industry leader and was about to go international, but Zuckerman had other issues looming.

Zuckerman was released from prison in late 2013 after beating trumped-up charges by the government, which led to a decade of secretive activities that to this day remain sealed by the Feds. It is believed that his 7-year relationship with the government prior to founding Progenex, not only assured Zuckerman’s early release but would make his government enemies into allies and Zuckerman forever untouchable.

After just 14-months, on October 14, 2013, Zuckerman was released from Terminal Island Federal Correctional Institution, expecting to retake control of the Progenex empire he had won from Connelly. But his chief underling, Ryan Page, who would be later sued by CrossFit for trademark infringement, along with Steve Shamion, a trusted investor Zuckerman appointed as temporary Manager to protect his assets had other plans. Shamion and Page saw dollar signs, and instead elected to conspire to steal Progenex from Zuckerman and his ex-wife, Patricia Robinson, who Zuckerman gave full control of Progenex through its managing entity, Amidah LLC, and 40 investors. (See related court transcripts).

Zuckerman met Page four years prior to founding Progenex, rescuing him from a company he ran into the ground in Las Vegas with Luke Adams, who currently serves as Progenex’ dirty CFO.

Zuckerman refers jokingly to Page as the M&M pirate – a tongue-in- cheek descriptor of Page, who would eat an entire large bag of peanut M&M’s in every meeting, and hides his identity as Progenex’ puppet master. Page is hidden from sight by design, and not merely to avoid a head on collision with the legal freight trains coming for him.

Page is anything but a poster boy for a global sports-nutrition brand that caters to an elite athletic market. He not only lacks expertise in the field or requisite credentials to develop these products, but bears no physical resemblance to the exclusive athletes the products cater to. Page is a fraud in every way, and continues to thwart authorities and the courts, after being found culpable for defrauding over 40 investors, pilfering Progenex corporate assets, and failing to turn over the company to investors and Patricia Robinson. Page, along with his entire family, Luke Adam’s, and Paul Gomez, Zuckerman’s ex brother-in-law, are all alleged to be co-conspirators, helping Page to scatter Progenex assets around the world in a hide and seek game of catch me if you can.

Page not only illegally controls Progenex, but has his hands in every pot, using sub-entities he owns and controls as the company’s vendors. From manufacturing to shipping and co-packing, Page created a tangled web used to fleece the company and its investors in every way, including changing the long-established website address from www.progenexusa.com to www.progenexfit.com, to the avoid seizure of Progenex assets ordered by the courts.

Paul Gomez, who started as a warehouse boy for Billabong, a global surf brand, under then CEO Bob Hurley, founder of Hurley International, sold to Nike, apparently contributed nothing more than t-shirts to the supplement maker, and serves as a pin up patsy for Page. Zuckerman describes Gomez as an “illiterate parasite that betrayed his entire family,” along with wife Stephanie, Patricia Robinson’s sister. Robinson remains to this day the rightful heir to the Progenex throne, where Zuckerman put the controlling entity, Amidah LLC in her name for safekeeping prior to serving his prison term.

Page viciously targeted Robinson after Zuckerman let the legal wolves loose on Page, blackmailing her to backdate documents that would disavow her control and rights to Progenex. When Robinson refused, Page illegally ceased paying her distributions from the company, along with the rest of the Progenex investors. Not a single investor has received a dollar in profit or return on their investment to date, while Page lines his pockets and continues to deceive and defraud Progenex customers.

To say that Zuckerman has been lurking in the shadows all this time related exclusively to the Progenex saga would be inaccurate. Zuckerman has been anything but inactive.

Zuckerman knew he needed to be patient. After Zuckerman’s release in 2013 as noted above, Page and Shamion, along with Dwight Beckstrand, Progenex’ now disgraced former corporate counsel, who faced domestic violence charges, instead of returning Progenex to Zuckerman as agreed, conspired to destabilize and oust Zuckerman.

Page began plucking off, one by one, Zuckerman’s internal founding team at Progenex while he was serving time. In a Lord of The Flies-esque corporate kill off, Aaron Thomas, who raised most of the early startup capital for Progenex from over 40 close investors and family, was the first to go. Then came Cameron Verdi, a close friend Zuckerman salvaged from the loan modification business, who would later attempt his own coup by high jacking Amidah from Zuckerman’s ex-wife Patricia Robinson with no legal authority.

Cameron Verdi, who imposters as a founder was nothing more than a mid-level employee who Zuckerman appointed as a Wooden Indian to manage Amidah LLC under his direction.

Zuckerman is well known for making outrageous public commentary without restraint. When asked, Zuckerman explains that he simply says out loud what everyone else thinks. Zuckerman describes Verdi as a “nobody opportunist, dumber than his dog,” which is a bold statement considering Zuckerman’s love of animals.

Per Zuckerman and according to filed corporate documents, Verdi lacks any legal authority as a decision maker for Amidah LLC, the controlling entity and largest shareholder of Progenex. Verdi simply vexatiously interfered and bungled efforts to retake control of Progenex from Page. Patricia Robinson, Zuckerman’s ex-wife is the managing member of Amidah, owning 90%, and more than 45% of Progenex in the aggregate. Robinson remains in legal control of Amidah and therefore Progenex.

Any significant actions on behalf of Amidah must be authorized by Robinson, including but not limited to, bringing and settling litigation. But Verdi, per Zuckerman is “an unscrupulous troglodyte, who took advantage of Robinson’s lack of sophistication and turned on his master, Zuckerman.” And worse, Thomas Frost, the San Diego lawyer retained by Zuckerman to take the case, allowed it, and refused to talk to his actual client, Patricia Robinson.

Not only did Frost fail miserably in court using Zuckerman’s airtight roadmap and evidentiary file of over 2000 organized documents, but allowed Verdi to subvert Robinson, who is his true client, causing a four-
year stall to retake Progenex from Page. Zuckerman indicates that Frost should have been sued for malpractice and disbarred. And so should Judge Margret Nagle, according to Zuckerman, who had been stymied for 4 years in finalizing her ruling for these very reasons. Zuckerman remains emphatic that Judge Nagle failed to do her job. According to court transcripts and per Zuckerman, Judge Nagle was as well dumfounded related to how Frost was able to proceed without Robinson’s authority. In fact, Judge Nagle asked that Zuckerman testify to these facts as part of a recorded testinomy soon to be published.

Progenex is no longer the patented formula Dr. Connelly invented. Page uses Glanbia Nutritional’s patented whey-hydrolysate, Thermax 690, in both More Muscle and Recovery, the company’s marquis products.

The Connelly/Zuckerman war suffered many casualties, among them MGC and with it WGFE – the secret sauce that made Recovery and More Muscle unique. MGC severed ties with Connelly after Zuckerman won the company back. The formula is not sold by anyone in the US currently, but Zuckerman plans to change that. Connelly and MGC had published significant science behind WGFE’s efficacy, while Page buried independent lab reports that prove Progenex products lack of efficacy, and are nothing more than overpriced cheap whey, along with label fraud claims. Zuckerman claims Progenex is a fraud, and anyone can buy Thermax 690 from Glanbia or competitive alternatives that are superior hydrolysates, and Zuckerman intends to make sure they do.

Zuckerman doesn’t want Progenex, just its customers. Making deals with Progenex competitors, he plans to introduce WGFE 2.0 to millions of Progenex customers who will fast jump ship as the truth comes out.

Armed again with deep pockets and a dream team of high-powered lawyers, Zuckerman has no intention of picking up where Progenex and the lawyers failed. Zuckerman has other plans, and intends to disclose the brands fraud, along with Page, and migrate millions of customers to a recognized industry leader and announce a its full suite of WGFE 2.0 alterative product for less. (Soon to announced)

Zuckerman had his plan, and knew timing was key. Waiting patiently for the statute of limitations to run out for the government, who had been hunting his war chest for a decade, Zuckerman has quietly amassed a new army while reclaiming his resources to strike.

In a 3-part live streaming interview, conducted by high-level CrossFit influencers, and redirected back to www.progenexuntold.com, Zuckerman will tell the entire story from start to finish to what is expected to be a significant audience. But it doesn’t end there.

Zuckerman wants the customers to know the truth about Progenex and Page, and understand that they are being ripped-off, lied to, and are lining the pockets of a thief, Page – who not only betrayed the market, but has harmed innocent people and their families. Zuckerman believes that customers will be outraged and abandon the brand for new options – a safe landing where Zuckerman holds equity and can repay investors. Zuckerman’s team of internet mercenaries are prepped to get the word out via Twitter, Instagram, email, Google, and even to cell phones of customers directly.

Stay Tuned for Part II of Untold : Zuckerman’s live streaming interview dates, surprise guest host, and the launch of www.Progenexuntold.com.

Categories
Auto and Vehicles

Excellent vehicle servicing deals provider right now Reading, UK

Car service book online and Mot booking high quality provider Reading, UK right now: Here are some of the ways your car could fail an MOT. Screen wash not topped up. This basic task takes minutes, so don’t be caught out by it. The car was dirty or full of clutter. Clear the mess from the boot and cabin and give the windows and mirrors a quick wipe. A registration plate problem. For example, the plate used the incorrect type face/spacing, or was dirty or missing altogether. If you have a personalised plate, make sure it follows DVLA rules. An MOT test is a legal requirement once your car reaches 3 years of age. An MOT test must be undertaken by a DVSA certified MOT test centre. The DVSA guidelines specify what will be tested on your vehicle – these include your cars identification, bodywork of your car, the interior of your car and your car’s engine. Discover even more information at Mot Reading.

Have you ever collected your car after an MOT, and then been left open mouthed at the cost? Some MOT centres advertise one price and then add on hidden charges. There are no hidden charges with Tilehurst Service & MOT Centre. The price you see is the price you pay. We have an outstanding reputation for great customer service, high quality repairs and low prices. Call us today for a quote, and find out why. Great value MOT testing, at times to suit you.

If your radiator builds up deposits, it can mess with the cooling system in your car. To keep the radiator in top shape, a radiator flush will do the trick. How often you need to replace the radiator fluid will depend on your vehicle. Start by consulting the owner’s manual to get an idea. For the most part, you can get away with flushing the radiator every couple of years. Now that you know about these basic car repairs, you can keep your car in top shape for many years to come. Remember to rotate your tires, change the oil, replace the brake pads, and more.

Berkshire, UK by Carservice-Centre? Some people think you will void your warranty if you don’t service your car at a manufacturer’s dealership. However, that’s not the case. Independent garages, specialists and fast-fits are all capable of servicing your car without invalidating your warranty, provided they fit manufacturer-branded or OE parts and use up-to-date equipment and technical information to work on your car. The European Union’s Block Exemption Regulations, which were created in 1995 and apply until 31 May 2023, allow independent garages, traders and organisations to have the same access to the manufacturer technical data, and repair and servicing information as dealerships, allowing them to work correctly on all cars. They’re likely to be replaced with similar UK-specific rules that will apply after the EU rules expire.

How much does an MOT cost? The Vehicle and Operator Services Agency sets the maximum fee official test centres can charge for an MOT. It’s currently £54.85 for cars and motor caravans and £29.65 for motorbikes, but many garages charge less than this – sometimes up to 50% less. Search online for “cheap MOT” or “MOT discount” to find out how you can save money on your car’s next MOT. Top 5 simple reasons for cars failing the MOT test: Nearly two in five MOT tests are a fail first time. Yet often this is because of minor faults the owner could easily have fixed beforehand.

How much can skipping oil changes affect your budget? Oh, plenty. Oil problems can be some of the costliest car maintenance issues to fix, since oil affects pretty much everything your car does. So don’t skip it. Getting your oil (and filter) changed costs around $35–75.1 For the price of a family dinner at a higher-end fast food joint, you’ll lower the risk of wearing out your engine—which costs a lot more than burgers and fries to replace.

Car Servicing Tilehurst from the car service centre at fantastic rates cheap car servicing is available on all makes and models of vehicles at half the main dealor rates we use all manafactor recomendation parts to avoid invalidating your 3 year warrenty at all times and we Will give you 12 moths warrenty om labour and parts on all our work we carry out on our customers vehicles. This is a 25 point Check List starting with replacing your engine oil and oil filter and we check all your under bonnet oil levels such as screen wash coolant level power steering fluid brake fluid and recommend when it requires replacing and a overall visual Check of your vehicle.

Not only is it important to have a cooling system inside the car, but it’s also necessary to reduce the amount of heat entering your car from outside. A great way to do that is by applying a layer of ceramic car coating. This type of coating bonds with the paint, providing lasting protection to both the exterior and interior of your car. Ceramic car coating protects your car from absorbing the heat and the associated radiations like harmful ultraviolet rays. It also helps you ensure that overheating is not causing cracks in the paint of your car. Besides, ceramic car coating can prevent stains from bird droppings settling on your car’s surface, as well as from minor scratches. And if all these reasons aren’t good enough, here’s the jackpot – it can help your car look as good as new!

Car Servicing Tilehurst Whichever car it is that you drive, be it a family saloon, a huge 4×4 or a sports car, you would always love to have it be a reliable and consistent performer, like a well-oiled machine. And this isn’t very difficult. All you need to do is take the car in for it’s periodic checks. Car servicing is the single most important element to ensure a long and trouble-free life for your car. Car Service Tilehurst – Scheduling Your Car’s ‘Scheduled Maintenance’Of course, there’s every possibility that your schedule is a bit too hectic and you’re busy with work, or just cannot afford to drop the car off for a service because you’re afraid it might just take too long. See additional details at carservice-centre.co.uk.

Take care of tire pressure: The tire pressure of the car not only affects the mileage, but it is also the cause of accidents at times. Always check the tire pressure whenever you have to take the car somewhere. These days the feature of tire pressure monitoring has also started coming in many modern vehicles. Tire air can also be checked and filled for free at many petrol pumps.

As well as using the correct lettering style and spacing, your number plates need to be clean and easy to read from a distance. Modified number plates, damaged number plates or otherwise illegal plates will fail the MoT. If you own a diesel car fitted with a diesel particulate filter (DPF), it could be given a Major defect and automatically fail the MoT test if it emits “visible smoke of any colour” during metered checks. Testers will also inspect DPFs closely for signs of removal or tampering, awarding a Major defect and failing the car if foul play is detected. Testers must refuse to test any car where the “DPF canister has clearly been cut open and re-welded” unless the owner “can show evidence that there was a valid reason to cut it open, such as for filter cleaning.”

Ask questions. Lots of them. Don’t be intimidated. Ask questions about why something needs fixing or how a technology works. As the customer, you have a right to become more educated about your vehicle. Request Original Equipment Manufacturer (OEM) parts. Whenever parts need to be replaced, be sure to request genuine OEM components rather than generic pieces. Maintaining exact manufacturer specifications is important in achieving optimum performance. The low-price allure of aftermarket parts often prompts customers to forgo OEM quality, but spending the extra dollars on factory-approved equipment now can make a big difference down the road, especially in terms of vehicle longevity.

Categories
Industrial

Welder generators online shop United Kingdom 2023

Welding curtains supplier in the UK 2023? A cutting disc, also known as a slitting disc, is an abrasive disc that is used to cut through material. Common materials that are cut with a such a disc include steel, stainless steel & aluminium. These discs are a consumable item, therefore they are often sold in multiples. Their expendable nature means the user has to replenish their stock when they are running low. Cutting discs are usually manufactured from fibreglass net, a material that offers abrasive properties and a bonding resin. These components are added together and then formed under a combination of pressure & heat, thus forming a disc that can be used to cut through materials. Find even more details on Cutting discs online shop.

If you’re looking for quality metal grinding wheels, Makita is a brand worth checking out. This wheel is perfect for quickly grinding through metal, making it an essential tool for any serious metalworker. With its durable construction and precision-cut teeth, the Makita Metal Cutting grinding wheel is sure to become a favorite in your workshop. These angle grinder wheels are designed for use with Makita 5? angle grinders. It has grain grit, a hard bond matrix, and wheel thickness that provide the best balance. This tool will cut more than other wheels because it’s made of carefully selected materials. You can use it to cut through all metal materials, including metal, steel, and inox steel. In addition, this product can even cut through sheet metal, rebar, steel pipe as well as small to medium diameter pieces of solid material. The grain on these cutting grinding wheels is made from a high-performance aluminum oxide which will provide a long life span for the product. Not only does it lasts a long time but also the material is able to soothe many tough materials with little effort.

The Millermatic 211 is a professional MIG welding machine is one of the best MIG welders available. It’s able to run from 110 or 240 inputs. When connected to the 240 side, it features a 40 percent duty cycle at 150 amps. On household 110, it delivers a 20 percent duty cycle at 115 amps. That 115 amps will let you weld material around 1/8-inch thick, so for the home DIY enthusiast with no 220-volt receptacle, the Millermatic 211 will let you get a lot done, though it comes at a real cost. The Auto Spool Gun Detect™ is a handy feature that will automatically detect when a MIG gun or spool gun is connected eliminating the need for a switch. It also has Thermal overload protection which will shut down the power source output, if overheating of either the main transformer or rectifier occurs. Its real market is professionals needing portability. Rolling it around to reach different parts of a car body would be an example. Bringing it to the job site for HVAC professionals installing ductwork or repairing furnaces is another. Considering it can weld up to 3/8-inch thick steel or aluminum, it’s also portable enough to move around on a steel construction site for details like stairs and railings. It also features a solid metal wire drive. With professional power, dual-input versatility, Miller customer service and true MIG capability, the Miller magic 211 is our Professional’s Choice for Best MIG.

One of the “cardinal sins” that almost every shop commits is over-welding. This means that if the drawing calls for a 1/4″ fillet weld, most shops will put down a 5/16″ weld. The reasons? Either they don’t have a fillet gauge and are not exactly sure of the size of the weld they are producing or they put in some extra to “cover” themselves and make sure there is enough weld metal in place. But, over-welding leads to tremendous consumable waste. Let’s look again at our example. For a 1/4″ fillet weld, the typical operator will use .129 lbs. per foot of weld metal. The 5/16″ weld requires .201 lbs. per foot of weld metal – a 56 percent increase in weld volume compared to what is really needed. Plus, you must take into account the additional labor necessary to put down a larger weld. Not only is the company paying for extra, wasted consumable material, a weld with more weld metal is more likely to have warpage and distortion because of the added heat input. It is recommended that every operator be given a fillet gauge to accurately produce the weld specified – and nothing more. In addition, changes in wire diameter may be used to eliminate over-welding.

How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!”

Power tool pioneers Bosch have been in the game since 1886. They certainly know a thing or two about making one of the best corded angle grinders on the market. I was amazed at the power output and precision you can achieve with the GWS 7-115 angle grinder. Starting off with the look and feel of this grinder, it’s surprisingly slimline and lightweight. It’s certainly easy to hold on to and weighs less than 2 kg. Bosch have made use of a clever 20° angle side handle as well for ultimate precision grinding. Making use of one of Bosch’s brilliant 720 Watt Champion motors, you know this is a tool that’s built to last. Everything is chunky and built for hard work. They’ve included a two-stage safety switch to avoid accidental starts, which is essential for any tool like this. The motor spins a 115 mm cutting disc up to an impressive 11,000 rpm. There’s a relatively low amount of vibration when in use as well. Just 6.5 m/s², which isn’t bad at all for corded grinders. I like the fact that Bosch have flattened the gear head. This reduces the overall size and makes it easy to get into tight spots. If you’re looking for one of the best angle grinders from one of the top names in the business, this is a great choice.

Some advices about welding equipment, MIG and TIG welders, plasma cutters. TIG welding is similar to to a MIG welder as it uses an electric arc in the same was as MIG welding does but differs in a few ways. Instead of a continuous spool of consumable wire, a TIG welder uses long tungsten welding rods that are manually slowly fed into the weld puddle to join the metal. TIG welding requires gas, usually argon, to protect and cool the weld puddle from external contamination. TIG welding is more suited to welding thinner materials such as stainless steel and aluminium as you can get the power down lower to reduce the risk of blow through and can even weld two dissimilar metals. Suitable for tricky welds such as S curves but TIG welders are still capable of welding heavier materials depending on the machine. TIG welding takes more practice that MIG welding as the process is much more manual with controlling the torch, welding rod and gas by hand (and foot for the gas) but once mastered will produce the highest quality welds making it the better choice where perfect, precise welds are required but due to the manual process is the least productive.

No, we’re not saying that you should stop working with metals. But, you can save yourself from these harmful gases just by getting a portable fume extractor. It can save your life by preventing you from contracting life-threatening infections. That’s why I’ve brought to you this detailed guide where you can find the best portable fume extractor among the 12 options that can save you from welding fumes. The 445 lbs. fume extractor might not be the easiest fume extractor to move around. But, the overall features and build quality compensates for what it lacks in mobility. You won’t get a better deal within the price range it comes in.

This drill has a powerful 9 Amp motor, high-end 2-coil magnet, and compatible with ¾” diameter shank annular cutters. To start off, this drill is very proud of how easy it is to handle. It weighs a mere 26.5 pounds and it has a conveniently located handle, making uncomfortable drilling positions more bearable. It has a straightforward 2-button control panel that is also conveniently located and easy to use. Other perks that you get with this drill is a hard case and, depending on where you buy, you may also receive a kit containing German-made annular cutters. Like some of the other drills in this list, you can also fit the feeding handles on either side of the drill, depending on what is ergonomic and comfortable for you. This drill also has an easy to turn off feature to add an element of safety to your drilling. This button is big and easily accessible. This is a solid drill that is perfect for all handymen.

The ESAB group is owned by Colfax Corporation. Over 100 years after the company was founded, ESAB serves a global market for welding and cutting equipment. The group is organized in the regions Europe, North America, South America, Asia/Pacific and India. ESAB is represented in almost every country by subsidiaries or agents. Sales and support is established in 80 countries and there are 26 manufacturing plants across four continents. Visit the web site of your nearest ESAB office to find out more. Customers Talk, We Listen – The voice of the customer will always drive the development of our strategic plans and actions. Living this value is done by getting Customer Input and Expectations, at every opportunity, and by differentiating ourselves in How We Deliver to our customers. Innovation Defines Our Future – Individual and organizational creativity will drive breakthrough ideas for technology, products, solutions, and processes. We live this value by providing differentiated customer solutions, creating products and services that improve quality of life and environmental stewardship through Creative Thinking, and by understanding What Innovation Brings.

Our welding tables are to be self-assembled. This is an easy process; full instructions are provided. A wide range of tools are available for use with these tables and they are available as added optional extras in the custom options above. If you require guidance on which tool set would be the most suitable for you please feel free to call our helpful staff. *Please note that current lead times on these welding tables are 3-4 weeks, however if you require the table quicker please alert us and we will do our best to assist with your enquiry*

If you’re a beginner welder but don’t mind splashing the cash for a top of the range welder, then try the Millermatic 141. Miller have really pushed the boundaries of usability with this welder and it features an auto-set feature for an easy set up, and infinite voltage and wire speed control. All you have to do is select the thickness of the metal you’re welding and you’re ready to start welding straight away. If you open up the machine you can tell that all the parts are great quality and really durable as well. There are more powerful welders on the market for the price, but there’s nothing better for welding up to 3/16 inch steel. See the full review here.

MIG welders are divided into transformer and inverter models. Briefly, transformer machines feature only mechanical parts that can adjust the output voltage “sequentially” while the unit is off. The output voltage is not stabilised and may decrease under load. Still, a simple design is the main benefit of transformer welders that facilitate their maintenance. Also, they are often cheaper. Inverter MIG welders are fitted with electronics that allow a smooth voltage adjustment, so it isn’t susceptible to drops and does not fall under load. Of course, power is the main feature of any electric tool. As for MIG welders, their power depends on the maximum amperage, more usually, the output range. This range determines the unit’s field of application. Powerful models can be used on small construction sites or in repair shops, while less powerful models are usually used for private needs. For example, the welders of up to 200A are great for home use; the 300A models are suitable for small repair shops, and if you need a high output and continuous work, consider welders over 300A.

United Kingdom market look: LOTOS Technology is a California company that has only been around since 2007. Still, the LOTOS MIG is impactful and high quality enough to make it onto our list. This one is a versatile machine that is a fair price of about $400. And—provided that you have the necessary 240-volt outlet in your home—it can be set up in a matter of minutes. The duty cycle of this welding newcomer is impressive, and it can be utilized by pros and amateurs who have been continually impressed by the bang they’ve gotten for their buck. The LOTOS can weld steel and stainless steel from 18 gauge to ¼ inches and aluminum to 1/8 inch or thicker. Thermal overload protection doesn’t let this machine overheat, and infinitely adjustable heat/amperage as well as wire speed makes using the LOTOS simple. Check out the LOTOS MIG140 for a lower power alternative.

Use the Personal Protective Equipment (PPE): It is mandatory to use various appropriate PPE while handling an industrial gas cylinder. For instance, wear safety glasses, safety shoes, gas masks, and safety glasses, while working with cylinders filled with compressed gases. Similarly, it is important to use flame arrestors when using acetylene cylinders in compressed air. Use Regulators Properly While Handling Cylinders: Regulators are devices, which are designed to lower the working pressure of the gas. These devices differ according to gases. Many times, the regulators aren’t handled and stored properly. This improper usage may lead to problems in the long run. Hence, it is important to take several precautions while using regulators.

Even best welder for home use may not be enough for someone who plans on using their MIG welding skills in the workplace. If you’re looking for a high-quality machine that’s ideal for industry-grade jobs, then the Sealey SuperMIG180 may be an excellent choice. Designed as a professional car welder, the SuperMIG180 model is ideal if you’re welding with Argon and CO2. This high-quality model comes with a forced-air solution for cooling inside to make sure that you can extend your welding times without overheating. There’s also a non-live torch fitted into the system so you can reduce the risk of potentially creating arcs when you’re on the move between fast-paced job. Because it’s a professional-level welder, the Sealey SuperMIG also comes with a high-level CO2/Argon regulator, so you can limit your risk of dangerous mistakes as you work. Perhaps one of the easier-to-use small MIG welder options on the market, the Sealey model is very straightforward, particularly for professionals. Although it’s designed for high-level use, there’s nothing to stop you from making the most out of your system within your workshop too. The set comes with an industrial gas regulator, 2 contact tips to choose from, as well as a gas cup. Read more info on here.